XH-W1308 12V temperature sensor controller

The XH-W1308 12V temperature sensor controller has a normally open relay output, with temperature display by 7-segment LED. The XH-W1308 12V temperature sensor controller can set the temperature level (1 level) or temperature range to trigger the relay switch. Thanks to this useful feature, users can easily create many interesting applications such as incubators, temperature alerts, automatic cooling, ...

The difference from the XH-W1290 model is that the XH-W1308 model has an additional mask, the function buttons are clearly decal. Wider temperature range with measuring range of -55 ~ 120 degrees Celsius, with siren when setting temperature, can set alarm when over set temperature, can set relay switch mode when temperature lower or higher than the set temperature.

In addition, this model is integrated with more diverse features installed by pressing and holding the "SET" button - the functions are selected according to the following table:

Feature Code Adjustment Range Default:

• P0 Set H / C C mode
• P1 Set the temperature error of 0.1 - 30 2.0
• P2 Set the highest temperature +120 120
• P3 Set the lowest temperature to -55 -55
• P4 Further adjustment or temperature +10 ~ -10 0
• P5 Slow start 0 - 10 minutes 0
• P6 Alarm temperature setting -55 ~ 120 0
• P7 Lock setting data on ~ off off
• P8 Restore factory settings on ~ off off

SPECIFICATIONS:

• Model: XH-W1308
• Power supply: 12VDC
• Current consumption: ≤ 3mA when measuring, ≤ 60mA when the relay is closed
• Temperature measurement range: -55 ~ 120 degrees Celsius
• Accuracy: 0.1 degrees Celsius
• Maximum load current: 10A
• Temperature probe: Thermistor 10K 0.5m waterproof sensor.
• Led display: 7 segment led blue / red
• There is a horn for setting temperature
• Temperature setting: by pressing the button: Set (Set) - Increase (+) - Decrease (-)
• Control temperature by relay.
• Output: relay is usually open